This vehicle demonstrates our ability to design and produce applications for your business needs.  View our album example details.

 click below to open and view all the pictures
 

              Hydrapneu's Demonstration Truck is equiped with the
              following equipment:

1.     VMAC VR70 under bonnet 70 CFM 150 PSI belt drive screw compressor,

2.    Rexroth A10VO 45 variable displacement piston pump delivering 100lpm at 250bar,

3.    Coupled via a thru dive connection to the A10VO45 is a Boss 80100-UBI 85 CFM at150PSI underdeck screw compressor,

4.    Both the A10VO45 and the Boss 80100-UBI are driven via the Hydrapneu FTPTO power take which is capable of 100 horsepower and 430 Nm torque.

5.    On the tray we have a Boss Infinity 60 CFM 150PSI hydraulic screw compressor,

6.    VMAC Predatair60 60 CFM 150 PSI hydraulic screw compressor,

7.    Dynaset HK400 hydraulic piston compressor 14 CFM 150 PSI,

8.    Dynaset HG3.5 Kva 240 volt single phase hydraulic generator,

9.    Dynaset hydraulic welder generator HWG220 producing 220 amps DC, 3.5kva single phase and 6.5Kva 3 phase,

10.  And under the tray a Dynaset HPW200-30 hydraulic pressure washer producing 200 bar and 30 lpm from the A10VO45 or 4lpm at 80 bar from the Toyota's own power steering pump.

11.  Behind the passenger seat we have the ZENA 200/400 amp DC welding system producing 200 or 400 amps at 100% duty cycle, switchable from CC stick mode to CV wire feeder mode, allowing the use of a (LN25) or the Ready Welder, as well as switchable to battery charge mode of 200 or 400 amps at 100% for high amp battery charging.